Command Reference LLDP Commands
Ruijie(config-lldp-civic)#
show lldp location civic-location { identifier
id | interface interface-name | static }
Displays the LLDP Civic Address information.
11.13 lldp location elin identifier
Use this command to set an emergency number encapsulated in a Location Identification TLV. Use
the no form of this command to delete the number.
lldp location elin identifier id elin-location tel-number
no lldp location elin identifier id
ID of an emergency number, in the range from 1 to 1024.
Emergency number, in the range from 10 to 25 bytes.
Global configuration mode
This command is used to configure an emergency number.
The following example sets an emergency number.
Ruijie#config
Ruijie(config)#lldp location elin identifier 1 elin-location 085283671111
show lldp location elin-location { identifier
id | interface interface-name | static }
Displays an LLDP emergency number.
11.14 lldp management-address-tlv
Use this command to configure the management address advertised in LLDP packets. Use the no
form of this command to disable the advertisement of management address.
lldp management-address-tlv [ ip-address ]
To Next Page
Loading...
