Command Reference LLDP Commands
restore the default setting.
lldp timer notification-interval seconds
no lldp timer notification-interval
Interval of sending LLDP Traps, in the range from 5 to
3600 in the unit of seconds.
Global configuration mode.
To prevent excessive LLDP traps from being sent, you can set an interval of sending LLDP Traps. If
LLDP information change is detected during this interval, traps will be sent to the network
management server.
The following example sets the interval of sending LLDP Traps to 10 seconds.
Ruijie#config
Ruijie(config)#lldp timer notification-interval 10
Displays LLDP status information.
11.19 lldp timer reinit-delay
Use this command to set port initialization delay. Use the no form of this command to restore he
default setting.
lldp timer reinit-delay seconds
no lldp timer reinit-delay
Port initialization delay, in the range from 1 to 10 in the unit of
seconds.
Global configuration mode.
To Next Page
Loading...
