Ruijie RG-S29 Series

Command Reference LLDP Commands
Defaults
N/A
Command
Mode
Privileged EXEC mode
Usage Guide
Interface parameter: display the LLDP TLV configuration of the specified interface.
Configuration
Examples
The following example displays TLV information of port 1.
Ruijie# show lldp tlv-config interface GigabitEthernet 0/1
LLDP tlv-config of port [GigabitEthernet 0/1]
----------------------------------------------------
NAME STATUS DEFAULT
--------------------------------- ------ -----------
Basic optional TLV:
Port Description TLV YES YES
System Name TLV YES YES
System Description TLV YES YES
System Capabilities TLV YES YES
Management Address TLV YES YES
IEEE 802.1 extend TLV:
Port VLAN ID TLV YES YES
Port And Protocol VLAN ID TLV YES YES
VLAN Name TLV YES YES
IEEE 802.3 extend TLV:
MAC-Physic TLV YES YES
Power via MDI TLV YES YES
Link Aggregation TLV YES YES
Maximum Frame Size TLV YES YES
LLDP-MED extend TLV:
Capabilities TLV YES YES
Network Policy TLV YES YES
Location Identification TLV NO NO
Extended Power via MDI TLV YES YES
Inventory TLV YES YES
Related
Commands
Command
Description
N/A
N/A
Platform
N/A