Ruijie RG-S29 Series User Manual

Command Reference LLDP Commands
------------------------------------------------------------
Port status of LLDP : Enable
Port state : UP
Port encapsulation : Ethernet II
Operational mode : RxAndTx
Notification enable : NO
Error detect enable : YES
Number of neighbors : 1
Number of MED neighbors : 0
show lldp status command output description:
Field
Description
Global status of LLDP
Whether LLDP is globally enabled
Neighbor information last changed time
Time the neighbor information is latest updated
Transmit interval
LLDPDU transmit interval
Hold multiplier
TTL multiplier
Reinit delay
Port re-initialization delay
Transmit delay
LLDPDU transmit delay
Notification interval
Interval for sending LLDP Traps
Fast start counts
The number of fast sent LLDPDUs
Port status of LLDP
Whether LLDP is enabled on the port
Port state
Link status of port: UP or DOWN
Port encapsulation
LLDPDU encapsulation format
Operational mode
Operating mode of LLDP
Notification enable
Whether LLDP Trap is enabled on the port
Error detect enable
Whether error detection is enabled on the port
Number of neighbors
Number of neighbors
Number of MED neighbors
Number of MED neighbors
Related
Commands
Command
Description
N/A
N/A
Platform
Description
N/A
11.29 show lldp tlv-config
Use this command to display the advertisable TLV configuration of a port.
show lldp tlv-config [ interface interface-name ]
Parameter
Description
Parameter
Description
interface-name
Interface name

Ruijie RG-S29 Series Specifications

General

Brand	Ruijie
Model	RG-S29 Series
Category	Switch
Language	English