Ruijie RG-S29 Series User Manual

Command Reference ARP Commands
Platform
Description
N/A
2.10 arp trusted user-vlan
Use this command to execute the VLAN transformation while setting the trusted ARP entries. Use the
no form of this command to restore the default setting.
arp trusted user-vlan vid1 translated-vlan vid2
no arp trusted user-vlan vid1
Parameter
Description
Parameter
Description
vid1
VID set by the server.
vid2
VID after the transformation.
Defaults
This function is disabled by default.
Command
Mode
Global configuration mode.
Usage Guide
In order to validate this command, enable the trusted ARP function first. This command is needed
only when the VLAN sent by the server is different from the VLAN which takes effect in the trusted
ARP entry.
Configuration
Examples
The following example sets the VLAN sent by the server to 3, but the VLAN which takes effect in the
trusted ARP entry to 5.
Ruijie(config)# arp trusted user-vlan 3 translated-vlan 5
Related
Commands
Command
Description
service trustedarp
Enables the trusted ARP function.
Platform
Description
N/A
2.11 arp trust-monitor enable
Use this command to enable egress gateway trusted ARP. Use the no form of this command to
restore the default setting.
arp trust-monitor enable
no arp trust-monitor enable
Parameter
Description
Parameter
Description
N/A
N/A

Ruijie RG-S29 Series Specifications

General

Brand	Ruijie
Model	RG-S29 Series
Category	Switch
Language	English