Command Reference Basic Configuration Management Commands
This command is used to export user information to the file.
The following example exports user information to the file.
Ruijie# username export user.csv
Use this command to save running-config at a specified location.
write [ memory | terminal ]
Writes the system configuration (running-config) into NVRAM, which
is equivalent to copy running-config startup-config.
Displays the system configuration, which is equivalent to show
running-config.
Despite the presence of alternative commands, these commands are widely used and accepted.
Therefore, they are reserved to facilitate user operations.
The system automatically creates the specified file and writes it into system configuration if the device
that stores the file exists;
The system will ask you whether to save the current configuration in default boot configuration file
/config.text and perform an action as required if the device that stores the file does not exist possibly
because the boot configuration file is stored on a removable storage device, and the device has not
To Next Page
Loading...
