Ruijie RG-S29 Series

Command Reference DHCP Commands
p-node: peer-to-peer node
m-node: mixed node
h-node: hybrid node
Defaults
No type of the NetBIOS node is defined by default.
Command
Mode
DHCP address pool configuration mode.
Usage Guide
There are 4 types of the NetBIOS nodes of the Microsoft DHCP client: 1) Broadcast, which carries out
the NetBIOS name resolution by the broadcast method, 2) Peer-to-peer, which directly requests the
WINS server to carry out the NetBIOS name resolution, 3) Mixed, which requests the name resolution
by the broadcast method firstly, and then carry out the name resolution by the WINS server
connection, 4) Hybrid, which requests the WINS server to carry out the NetBIOS name resolution
firstly, and it will carry out the NetBIOS name resolution by the broadcast method if the response is
not received.
By default, the node type for Microsoft operating system is broadcast or hybrid. If the WINS server is
not configured, broadcast node is used. Otherwise, hybrid node is used. It is recommended to set the
type of the NetBIOS node as Hybrid.
Configuration
Examples
The following example sets the NetBIOS node of Microsoft DHCP client as Hybrid.
netbios-node-type h-node
Related
Commands
Command
Description
ip dhcp pool
Defines the name of DHCP address pool and enters the DHCP
address pool configuration mode.
netbios-name-server
Configures the WINS name server of the Microsoft DHCP client
NETBIOS.
Platform
Description
N/A
4.41 network (DHCP)
Use this command to define the network number and network mask of the DHCP address pool in the
DHCP address pool configuration mode. Use the no form of this command to restore the default
setting.
network net-number net-mask
no network
Parameter
Description
Parameter
Description
net-number
Network number of the DHCP address pool
net-mask
Network mask of the DHCP address pool. If the network mask is not