Ruijie RG-S29 Series

Command Reference DHCP Commands
Parameter
Description
Parameter
Description
ip-address
IP address of the WINS server. It is required to configure one IP
address at least.
ip-address2…ip-address8
(Optional) IP addresses of WINS servers. Up to 8 WINS servers can
be configured.
Defaults
No WINS server is defined by default.
Command
Mode
DHCP address pool configuration mode.
Usage Guide
When more than one WINS server is defined, the former has higher priory. The DHCP client will
select the next WINS server only when its communication with the former WINS server fails.
Configuration
Examples
The following example specifies the WINS server 192.168.12.3 for the DHCP client.
netbios-name-server 192.168.12.3
Related
Commands
Command
Description
ip address dhcp
Enables the DHCP client on the interface to obtain the IP address.
ip dhcp pool
Defines the name of the DHCP address pool and enter the DHCP
address pool configuration mode.
netbios-node-type
Defines the netbios node type of the client host.
Platform
Description
N/A
4.40 netbios-node-type
Use this command to define the node type of the master NetBIOS of the Microsoft DHCP client in the
DHCP address configuration mode. Use the no form of this command to restore the default setting.
netbios-node-type type
no netbios-node-type
Parameter
Description
Parameter
Description
type
Type of node in two modes:
Digit in hexadecimal form in the range of 0 to FF. Only the following
numerals are available:
1: b-node.
2: p-node.
4: m-node.
8: h-node.
String:
b-node: broadcast node