Ruijie RG-S29 Series

Command Reference Network Connectivity Test Tool Commands
Guide
response data does not match the request data, a ‘Request receive error.’ message is displayed and the
statistics is listed in the end. For the extension functions of ping ipv6, the number, quantity and timeout time
of the packets to be sent can be specified, and the statistics is also displayed in the end. To use the domain
name function, configure the domain name server firstly. For the concrete configuration, refer to the DNS
Configuration section.
Configurat
ion
Examples
The following example tests the connectivity of a network to locate the network connectivity problem.
Ruijie# ping ipv6 2000::1
Sending 5, 100-byte ICMP Echoes to 2000::1, timeout is 2 seconds:
< press Ctrl+C to break >
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/10 ms
The example below shows the extension ping ipv6.
Ruijie# ping ipv6 2000::1 length 1500 ntimes 100 timeout 3 data ffff source
192.168.4.10:
Sending 100, 1500-byte ICMP Echoes to 2000::1, timeout is 3 seconds
< press Ctrl+C to break >
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!
Success rate is 100 percent (100/100), round-trip min/avg/max = 2/2/3 ms
Related
Command
s
Command
Description
N/A
N/A
Platform
Descriptio
n
N/A
10.4 show rping detail
Use this command to display Rping information.
show rping detail
Parameter
Description
Parameter
Description
N/A
N/A
Defaults
N/A
Command
Mode
Privileged EXEC mode/Global configuration mode/Interface configuration mode