Command Reference OSPFv2 Commands
GR Help capability described in the RFC3623 Graceful
Restart
OSPF device type, including normal, ABR, and ASBR
Delay before the SPF calculation is invoked after the
topology change is received
Minimum holdtime between two SPF calculations
Parameter used for LSA pacing, checksum calculation, and
aging interval
Incomming current DD
exchange neighbors
Number of neighbors under interaction. The incoming
neighbors are those entering the exstart status for the first
time.
Outgoing current DD
exchange neighbors
Number of neighbors under interaction. The outgoing
neighbors are those exiting from the higher status to the
exstart status for re-interaction.
Number of external LSAs stored in the database
External LSA Checksum
Sum
Checksum sum of external LSAs stored in the database
Number of external LSAs stored in the database
Checksum sum of external LSAs stored in the database
Number of non-default
external LSA
Number of external LSAs with non-default routes
External LSA database
limit
Limit of external LSA number
Exit database overflow
state interval
Time of exiting the overflow status
Whether the current OSPF process is in the overflow status
Log Neighbor Adjency
Changes
Whether the record switch for neighbor status change is
enabled
Number of areas
attached to this router
Total number of areas on the devices
Area type, including normal, stub, and nssa
Number of interfaces in
this area
Number of interfaces in this area
To Next Page
Loading...
Need help?
General