Command Reference OSPFv2 Commands
Number of fully adjacent
neighbors in this area
Number of Full neighbors of the area
Number of fully adjacent
virtual neighbors through
this area
Number of Full neighbors with virtual connections in the area.
It is effective only in the non-backbone default-type areas.
Authentication mode of the area
SPF algorithm last
executed
Time from the previous SPF calculation to the current time
SPF algorithm executed
times
Times of SPF calculations
Total number of LSAs in this area
Checksum sum of the LSAs in the area
Whether to convert the NSSA LSA to External LSA. It is
effective on the ABR OSPF process in the NSSA.
The 29 series switch does not support BFD and VRF.
2.51 show ip ospf border-routers
Use this command to display the OSPF internal routing table on the ABR/ASBR.
show ip ospf [process-id] border-routers