Command Reference OSPFv3 Commands
3.43 show ipv6 ospf summary-prefix
Use this command to display the external route convergence information of OSPFv3
show ipv6 ospf [ process- id ] summary-prefix
The following example displays the external route convergence information of OSPFv3.
Ruijie# show ipv6 ospf summary-prefix
OSPFv3 Process 1, Summary-prefix:
2001:db8::/64,Metric 16777215,Type0,Tag0,Match count0,advertise
Starts the OSPFv3 routing process.
Configures the converge route outside the
OSPFv3 routing domain.
3.44 show ipv6 ospf topology
Use this command to display the topology information about each area of OSPFv3.
show ipv6 ospf [ process- id ] topology [ area area-id ]
To Next Page
Loading...
Need help?
General