Ruijie RG-S29 Series

Command Reference OSPFv3 Commands
Mode
Usage Guide
N/A
Configuration
Examples
The following command displays the topology information about each area of OSPFv3.
Ruijie# show ipv6 ospf topology
OSPFv3 Process (1)
OSPFv3 paths to Area (0.0.0.0) routers
Router ID Bits Metric Next-Hop
Interface
1.1.1.1 EB --
2.2.2.2 E 1 2.2.2.2
FastEthernet 1/0
OSPFv3 paths to Area (0.0.0.1) routers
Router ID Bits Metric Next-Hop
Interface
1.1.1.1 B --
Related
Commands
Command
Description
ipv6 router ospf
Starts the OSPFv3 routing process.
area range
Configures the address range of the OSPF
area.
Platform
Description
N/A
3.45 show ipv6 ospf virtual-links
Use this command to display the virtual link information of the OSPFv3 process
show ipv6 ospf [ process- id ] virtual-links
Parameter
Description
Parameter
Description
process- id
OSPFv3 process ID number
Defaults
N/A
Command
Mode
Privileged EXEC mode.
Usage Guide
N/A