Ruijie RG-S29 Series

Command Reference NSM Commands
command to disable this function.
ipv6 unicast-routing
no ipv6 unicast-routing
default ipv6 unicast-routing
Parameter
Description
N/A
Defaults
This function is enabled by default.
Command
Mode
Global configuration mode
Usage Guide
This function can be disabled if the device is just used as the bridge-connection device or the VOIP
gateway device.
Examples
The example disables the IPv6 route function of RGOS.
Ruijie# no ipv6 unicast-routing
Related
Commands
Command
Description
ipv6 route
Configure the IPv6 static route.
show ipv6 route
Displays the IPv6 routing table.
Platform
Description
N/A
5.11 maximum-paths
Use this command to specify the number of equivalent routes. Use the no or default form of this command is
used to restore the default setting.
maximum-paths number
no maximum-paths number
default maximum-paths
Parameter
Description
Parameter
Description
number
Number of equivalent routes in the range from 1 to 64
Defaults
The default value varies with the device model.
Command
Mode
Global configuration mode