Command Reference Protocol-independent Configuration Commands
show ip as-path-access-list [ num ]
AS path access list number.
The following example displays the AS path access lists.
Ruijie# show ip as-path-access-list
AS path access list 30
permit ^30$
AS path access list number
Permits advertisement based on matching conditions.
6.42 show ip community-list
Use show ip community-list command to display the community list.
show ip community-list [community-list-number | community-list-name]
Number of the community list.
Name of the community list.
To Next Page
Loading...
Need help?
General