Command Reference Protocol-independent Configuration Commands
Ruijie# show ip community-list
Community-list standard local
permit local-AS
Community-list standard Red-Giant
permit 0:10
deny 0:20
Match the route community.
Delete the community attribute in the BGP routes.
6.43 show ip extcommunity-list
Use this command to display the extcommunity list.
show ip extcommunity-list [ extcommunity-list-num | extcommunity-list-name ]
extcommunity-list number, ranging from 1 to 199.
Privileged EXEC mode, global configuration mode, interface configuration mode, routing protocol
configuration mode and route map configuration mode.
Ruijie # show ip extcommunity-list
Standard extended community-list 1
10 permit RT:1:200
20 permit RT:1:100
Standard extended community-list 2
10 permit RT:1:200
Expanded extended community-list rt_filter
13 permit 1:100
To Next Page
Loading...
Need help?
General