Ruijie RG-S29 Series

Command Reference Line Commands
Defaults
N/A
Command
Mode
Line configuration mode
Usage Guide
This command is used to set the logout message for the line. The characters entered after the ending
delimiter are discarded directly, The logout message is displayed when the user logs out.
Configuration
Examples
The following example sets the logout message to “Logout from the ruijie device”.
Ruijie(config-line)#vacant-message @ Logout from the ruijie device @
Related
Commands
Command
Description
N/A
N/A
Platform
Description
N/A
3.51 width
Use this command to set the screen width for the line. Use the no form of this command to restore the
default setting,
width screen-width
no width
Parameter
Description
Parameter
Description
screen-width
Sets the screen width for the line, in the range from 0 to 256,
Defaults
The default is 79.
Command
Mode
Line configuration mode
Usage Guide
N/A
Configuration
Examples
The following example sets the screen width for the line to 10.
Ruijie(config-line)# width 10
Related
Commands
Command
Description
N/A
N/A
Platform
N/A