Command Reference IGMP Snooping Commands
no ip igmp snooping svgl profile
default ip igmp snooping svgl profile
Profile number, in the range of 1-1,024
No profile is associated.
Global configuration mode
When the IGMP Snooping works in the SVGL and IVGL-SVGL mode, a profile shall be associated to
specify the multicast group address range applied in the SVGL or IVGL-SVGL mode.
The following example specifies the profile 2 applied in SVGL mode.
Ruijie(config)# ip igmp snooping svgl profile 2
2.24 ip igmp snooping svgl subvlan
Use this command to specify the subvlan of multicast VLAN.
Use the no or default form of this command to restore the default setting.
ip igmp snooping svgl subvlan [vid-range]
no ip igmp snooping svgl subvlan [vid-range]
default ip igmp snooping svgl subvlan [ vid-range ]
VLAN ID or range of VLAN ID
By default, all VLANs except shared VLANs serve as its sub VLANs.
Global configuration mode
This command only takes effect in SVGL and IVGL-SVGL mode.
The following example specifies VLAN 3 as the shared VLAN and VLAN 2, VLAN 5 to 7 as the sub
VLANs.
Ruijie(config)# ip igmp snooping svgl vlan 3
To Next Page
Loading...
Need help?
General