Configuration Guide AAA Commands
This function is disabled by default.
Global configuration mode
Use this command to enable AAA. If AAA is not enabled, none of the AAA commands can be
configured.
The following example enables the AAA security service.
Ruijie(config)# aaa new-model
Defines a user authentication method list.
Defines a user authorization method list.
Defines a user accounting method list.
Use this command to configure the number of users limit for the domain, which is only valid for the
IEEE802.1 users.
Use the no form of this command to restore the default setting.
The number used for the user limitation is only valid for the IEEE802.1 users.
By default, no number of users is limited.
Domain configuration mode
This command limits the number of users for the domain.
The following example sets the number of users to 20 for the domain named ruijie.com.
Ruijie(config)# aaa domain ruijie.com
To Next Page
Loading...
Need help?
General