Configuration Guide RADIUS Commands
Global configuration mode
This command is used to enable RADIUS to support the cui function.
The following example enables RADIUS to support the cui function.
Ruijie(config)# radius support cui
2.6 radius vendor-specific extend
Use this command to extend RADIUS not to differentiate the IDs of private vendors.
Use the no form of this command to restore the default setting.
radius vendor-specific extend
no radius vendor-specific extend
Only the private vendor IDs of Ruijie are recognized.
Global configuration mode
This command is used to identify the attributes of all vendor IDs by type.
The following example extends RADIUS so as not to differentiate the IDs of private vendors:
Ruijie(config)# radius vendor-specific extend
Sets the QoS value sent by the RADIUS server
as the cos value of the interface.
To Next Page
Loading...
Need help?
General