Configuration Guide RADIUS Commands
This function is disabled by default.
Global configuration mode
This command is used to configure accounting update packet retransmission for the second
generation Web authentication user exclusively.
The following example configures accounting update packet retransmission for the second
generation Web authentication user.
Ruijie(config)#radius-server account update retransmit
2.9 radius-server account vendor
Use this command to enable account-request packets to contain vendor-specific RADIUS
attributes.
Use the no or default form of this command to restore the default setting.
radius-server account vendor vendor_name package
no radius-server account vendor vendor_name package
default radius-server account vendor vendor_name package
Account-request packets do not contain vendor- specific RADIUS attributes by default.
Global configuration mode
Use this command to enable account-request packets to contain vendor-specific RADIUS
attributes.
The following example enables account-request packets to contain “cmcc”.
Ruijie(config)# radius-server account vendor cmcc package