Configuration Guide RADIUS Commands
2.10 radius-server attribute class
Use this command to analyze the flow control value of the RADIUS CLASS attributes.
Use the no form of this command to restore the default setting.
radius-server attribute class
no radius-server attribute class
This function is disabled by default.
Global configuration mode
This command is required if the server pushes the flow control through the CLASS attribute.
2.11 radius-server attribute 31
Use this command to specify the MAC-based format of RADIUS Calling-Station-ID attribute.
Use the no form of this command to restore the default setting.
radius-server attribute 31 mac format { ietf | normal | unformatted }
no radius-server attribute 31 mac format
The standard format specified by the IETF
RFC3580. ‘-‘is used as the separator, for
example: 00-D0-F8-33-22-AC.
Normal format representing the MAC
address. ;.’is used as the separator. For
example: 00d0.f833.22ac.
To Next Page
Loading...
Need help?
General