Chapter 12: Final Recording Medium Setup, Rev. 1.5
VDR-100G3/G3S Installation Manual 10/12/2008
12 - 5
With a 4 GB storage capacity, the Rutter FRM (RUT-02447) Fixed Capsule has the capacity to
he Rutter FRM (RUT-02447) Fixed Capsule has a release mechanism to facilitate underwater
he manufacturer should be contacted to extract the data when the Rutter FRM (RUT-02447)
Planning for the Rutter FRM (RUT-02447) Fixed Capsule
les. These cables
tted
lan to mount the Rutter FRM (RUT-02447) Fixed Capsule near the bridge on the external deck
e
re sources;
ance;
s;
ork; and
in
Mounting the Rutter FRM (RUT-02447) Fixed Capsule
he selection of a mounting location should provide for convenient access during inspection
he Rutter FRM (RUT-02447) Fixed Capsule is supplied with interconnect cables (3 meters of
d
he Rutter FRM (RUT-02447) Fixed Capsule and deckmount are delivered completely
unt the
1. Standard: Weld the supplied mild/steel (or aluminium when specifically ordered with the –
A option of the installation package) deckplate to the deck and subsequently fastening
store audio, radar video and serial data for 12 hours as defined in the regulations. When the
power supply is removed the Rutter FRM (RUT-02447) Fixed Capsule will retain the data for
more then 10 years.
T
recovery both by a diver or a ROV. Suitable handles are provided to ensure that the capsule may
be retrieved safely after release.
T
Fixed Capsule has been damaged after an incident, e.g. the capsule was exposed to fire or the
ship has sunk. Alternatively, authorities may apply to the manufacturer for instructions on how to
retrieve the recorded data.
12.2.1.1
The Rutter FRM (RUT-02447) Fixed Capsule is supplied with interconnect cab
must connect to the VDR-100G3/S through a junction box (not provided with VDR-100G3/S).
The junction box is normally mounted on the exterior deck and located near the FRM and
positioned within range of the interconnect cable. All hull penetrations for cables must be fi
with waterproof glands (not provided with VDR-100G3/S).
P
to increase the probability of its survival and recovery after an incident. The capsule must be
positioned clear of rigging and other potential obstructions and as near to the centreline of th
ship as practically possible. Criteria to be considered when assessing the optimum position
shall include but not be limited to the following:
Separation from fuel or other potential fi
Separation from probable sources of mechanical damage;
Operational environment for continued serviceability;
Accessibility for copying of recorded data and for routine mainten
Facilitation of underwater removal and retrieval by both divers and ROV
Clear unobstructed space around the capsule to allow an ROV or diver to w
Mounted away from sound absorbing materials such as honeycomb structure, tarpaul
fabrics, clothing, cargo, etc to ensure that the Rutter FRM (RUT-02447) Fixed Capsule
beacon operates correctly.
12.2.1.2
T
intervals. The mounting location should also provide clearance for removing the beacon from its
mounting cradle.
T
Ethernet cable and 3 meters of Power cable. These cables must connect to the VDR-100G3/S
through a junction box (not provided with VDR-100G3/S). The junction box must be shielded an
connected to the hull of the vessel.
T
assembled and sealed. DO NOT open the capsule at the time of installation. Simply mo
capsule on the deck and connect the cables to the junction box to complete the installation. Two
methods may be used to affix the deckmount to the deck;
To Next Page
Loading...