Rutter VDR-100G3 - A2.9 Fire Doors Device; A2.9.1 Add Discrete or Add MTPT

Appendix 2: System Configuration File, Rev. 1.1
A2.9 Fire Doors Device
The Fire Doors tab requires configuration information for the ship’s Fire Doors (see Figure A2- 24
- Fire Doors below).
Figure A2- 24 - Fire Doors
A2.9.1 Add Discrete or Add MTPT
To add a Discrete or MultiPoint (MTPT) device:
1. Click the appropriate toggle button provided (Add Discrete or Add MTPT). When clicked
the appropriate Configure device button becomes available.
Each time the Add Discrete or Add MTPT toggle button is pressed another Configure device
button will appear.
2. To configure each device, press the related Configure button.
Note! If a Discrete or MultiPoint button is mistakenly added, it can be removed.
Select the number of the device to be removed from the drop down box next to
the “Remove Device Number” button and then click the “Remove Device
Number” button to remove the device.
Example: In Figure A2- 24 - Fire Doors above, device number 2 (MTPT 2) has been selected in
the drop-down box for removal. Clicking the “Remove Device Number” button will remove the
“Configure MTPT 2” button.
VDR-100G3/G3S Installation Manual 06/10/2008
26