Appendix 5: Playback Software, Rev. 1.1
A5.18.1 Error Codes
The following table provides a list of error codes and descriptions that may be observed in the
Log Window of the Playback application:
Error Code Alarm Message
Binary Bit
Position
99$0 Status Clear 0000000000
99$1 Storage Error 0000000001
99$2 Video Error 0000000010
99$4 Audio Error 0000000100
99$8 NMEA Error 0000001000
99$16 Power Error 0000010000
99$32 Microphone Error 0000100000
99$64 FRM Error 0001000000
99$128 Lyngso Error 0010000000
99$256 Power Comms Error 0100000000
99$512 Remote Error 1000000000
99$1024 GPS Error 10000000000
Table 1 - Playback Log Window
In the event of simultaneous errors, it will be necessary to convert the displayed error code to its
binary counterpart. A multiple error will display multiple 1-bits in the binary string, which can then
be interpreted. For example, the error code 99$17 converts to a binary string of 0000010001,
representing a simultaneous Storage and Power error.
VDR-100G3/G3S Installation Manual 06/10/2008
20
To Next Page
Loading...