Appendix 5: Playback Software, Rev. 1.1
VDR-100G3/G3S Installation Manual 06/10/2008
26
5. Select a Start and End time for the extracted segment. As mentioned above, the Start
time automatically appears as the time when the Data Extraction window was opened.
However, this can be changed.
To adjust either the Start or End time, move the applicable scroll bar. The file size of the
extracted segment will appear to the right of the End scroll bar. This is particularly useful,
for example, when attempting to extract a segment to copy to a recordable Compact
Disc.
6. To create an archived file of the extracted data at the same time as the extracted data is
being copied to the selected destination folder, select the “Archive Extracted Data”
checkbox.
7. To start the data extraction, press the “Start” button located in the lower right of the Data
Extraction window. A progress bar will appear at the bottom of the window to indicate the
progress of the extraction.
8. Once completed, the Data Extraction window can be closed via the “Exit” option from the
“File” menu.
A5.24 Closing the Playback Application
The application cannot be closed while a voyage playback is running. To close the application
follow these instructions:
1. Stop the playback by selecting Stop from the Playback menu, or by pressing the ‘Stop’
button in the Controls toolbar.
2. Press the ‘Close’ (x) button in the upper right hand corner of the application’s main
window, or choose Exit from the File menu.
When the VDR Playback application is restarted, it will restart in the mode in which it was
operating when closed. For example, if the VDR Playback application was in Real Time Display
mode when it was closed, on the next restart it will open in Real Time Display mode.
To Next Page
Loading...