Rutter VDR-100G3 - Frm Maintenance Sheet

VDR Installation & Commissioning Checklist, Rev 1.2
5 FRM Maintenance Sheet
The following items should be completed (where applicable) for the Final Recording Medium (FRM) unit installed during the installation.
1. Main FRM
Fixed Capsule Float-Free Capsule
Part No.: Capsule Serial No.:
Software Version No.: Model No.:
Beacon Serial No. (if applicable): Beacon Date (if applicable):
Float-Free Capsule Mounting Bracket Serial No. (if applicable):
Float-Free Hydrostatic Release Serial No. (if applicable):
Network Parameters
FRM IP Address
FRM SubNet
Default Gateway IP
FRM Memory Partition Configuration (L3 Units Only)
Total Granules in Crash Module
Number of Bytes Per Granule
Currently Unassigned Granules
Granule/Byte Allocation and Stream Names
Position Number of Granules (L3) Stream Name
0
1
2
3
4
VDR Installation Manual 06/10/2008
13