Rutter VDR-100G3 - A2.4.4 Date of Manufacture; A2.4.5 Beacon Serial Number and Battery Expiry Date; A2.4.6 Distance from Bow; A2.4.7 Distance from Centerline

Appendix 2: System Configuration File, Rev. 1.1
A2.4.4 Date of Manufacture
Enter the FRM’s date of manufacture.
A2.4.5 Beacon Serial Number and Battery Expiry Date
Enter the beacon serial number and battery expiry date, both of which can be found on the
beacon.
A2.4.6 Distance from Bow
Enter the distance of the FRM unit from the ship’s bow.
A2.4.7 Distance from Centerline
Enter the distance of the FRM unit from the ship’s centerline.
A2.4.8 Direction from Centerline
Select either the Port or Starboard radio button to indicate the FRM unit’s direction from the ship’s
centerline.
A2.4.9 Deck
Enter the Deck number and, if necessary, name on which the FRM unit is located.
A2.4.10 FRM IP Address
Enter the IP address of the FRM unit.
A2.4.11 FRM Subnet Address
Enter the subnet address of the FRM unit.
A2.4.12 Default Gateway IP
Enter the default gateway IP of the FRM unit.
VDR-100G3/G3S Installation Manual 06/10/2008
8