Chapter 12: Final Recording Medium Setup, Rev. 1.5
Alternatively, the installer can use Windows Explorer to change the JoTron Float-free SFRM
Capsule’s IP address:
1. Type in \\192.168.0.37 and hit enter.
2. Right click on the “Admin” Box.
3. Click “Connect to network station”.
4. Select a free station letter.
5. Click” Connecting using a different user name”.
6. In user name field enter ‘admin’, and in the password field enter ‘jotadmin’.
7. Press “Finished” key.
8. Open and change the “config.txt” file in “Word PAD” to match your configuration.
9. Store the changes. The JoTron Float-free SFRM Capsule will reboot with the new
settings.
10. From “My Computer” right click and remove new letters used by SAMBA.
VDR-100G3/G3S Installation Manual 10/12/2008
12 - 37
To Next Page