Santerno Sinus Penta - Page 262

SINUS PENTA
PROGRAMMING GUIDE
262/486
C003 Pulse Number
C003 Range 0-5
0: [12] 1: [24]
2: [48] 3: [96]
4: [192] 5: [384]
Default
1
1: [24]
Level
ENGINEERING
Address
1003
Function
This parameter has effect only if C001≠C002. It represents the min. value of pulses per
period obtained when modulation frequency changes (synchronous modulation).
C004 Silent Modulation
C004
Range
0-1
0: [No]; 1: [Yes]
Default
See Table 81 and Table 85
Level
ENGINEERING
Address
1004
Function
This parameter enables silent modulation. The electric noise due to the switching
frequency is dampened.