Santerno Sinus Penta - List of Parameters C310 to C316

PROGRAMMING GUIDE
SINUS PENTA
415/486
48.2. List of Parameters C310 to C316
Table 125: List of Parameters C310 to C316
Parameter FUNCTION User Level
MODBUS Address
Drive Software
(PD)
C310
Day of the week to be changed
ADVANCED
1237
C311
Day of the month to be changed
ADVANCED
1238
C312
Month to be changed
ADVANCED
1239
C313
Year to be changed
ADVANCED
1240
C314
Time (Hours) to be changed
ADVANCED
1241
C315
Time (Minutes) to be changed
ADVANCED
1242
C316
Clock/Calendar editing command
ADVANCED
1244
C310 Day of the Week to be changed
C310 Range
1 ÷ 7
1: Mon.
2: Tues.
3: Wed.
4: Th.
5: Fri.
6: Sat.
7: Sun.
Default
1
1: Mon.
Active
This parameter can be viewed and changed only if the Data Logger ES851
is installed and activated (R021 = ENABLE).
Address
1237
Level
ADVANCED
Function
This parameter sets the value of the day of the week to be changed.
C311 Day of the Month to be changed
C311
Range
1 ÷ 31
1 ÷ 31 days
Default
1
Day 1
Level
ADVANCED
Active
This parameter can be viewed and changed only if the Data Logger ES851
is installed and activated (R021 = ENABLE).
Address
1238
Function
This parameter sets the value of the day of the month to be changed.