Santerno Sinus Penta - Page 416

SINUS PENTA
PROGRAMMING GUIDE
416/486
C312 Month to be changed
C312 Range
1 ÷ 12
1: January
2. February
3: March
4: April
5: May
6: June
7: July
8: August
9: September
10: October
11: November
12: December
Default
1
1: January
Level
ADVANCED
Active
This parameter can be viewed and changed only if the Data Logger ES851 is
installed and activated (R021 = ENABLE).
Address
1239
Function
This parameter sets the value of the month to be changed.
C313 Year to be changed
C313
Range
2000 ÷ 2099
2000 ÷ 2099 years
Default
0
Year 2000
Level
ADVANCED
Active
This parameter can be viewed and changed only if the Data Logger ES851 is
installed and activated (R021 = ENABLE).
Address
1240
Function
This parameter sets the value of the year to be changed.
C314 Time (hours) to be changed
C314
Range
0 ÷ 23
0 ÷ 23 hours
Default
0
0 hours
Level
ADVANCED
Active
This parameter can be viewed and changed only if the Data Logger ES851 is
installed and activated (R021 = ENABLE).
Address
1241
Function
This parameter sets the time (hour) to be changed.
C315 Minutes to be changed
C315
Range
0 ÷ 59
0 ÷ 59 min.
Default
0
0 minutes
Level
ADVANCED
Active
This parameter can be viewed and changed only if the Data Logger ES851 is
installed and activated (R021 = ENABLE).
Address
1242
Function
This parameter sets the time (minutes) to be changed.