Santerno Sinus Penta - Page 81

PROGRAMMING GUIDE
SINUS PENTA
81/486
Serial Number
Serial Number
Range
0 ÷ 9999999
0 ÷ 9999999
Address
1827-1828 (LSWord, MSWord)
Function
This is the serial number of the drive. The serial number is required when
contacting ELETTRONICA SANTERNO’s CUSTOMER SERVICE in order to
activate the Fire Mode.
This measure is expressed in 32 bits divided into two 16-
bit words: the low part and
the high part.
Fire Mode Enable Password
Fire Mode
Enable
Password
Range
0 ÷ 9999 0 ÷ 9999
Default
0
0
Level
BASIC
Address
868
Function
To enable the Fire Mode, please contact ELETTRONICA SANTERNO’s
CUSTOMER SERVICE and give the Serial Number of the drive where the Fire
Mode is to be activated. Enter the password given by the Customer Service.
CAUTION The Fire Mode Enable Password is set to 0 when the Restore Default is performed.
Manufacturer
Manufacturer
Function
The name of Elettronica Santerno is displayed followed by Elettronica Santerno’s
website (santerno.com).
You can also send a Modbus query message to read the product ID.
Product ID
Product ID
Range
1 ÷ 65535
1 ÷ 65535
Address
476
Function
You can read the product ID from address 476. The eight high bits give the first
character of the ID, the eight low bits give the second character of the product ID.
E.g. for PD (Penta Drive):
MODBUS value read from address 476: 20548d
→
0x5044H
50H
→
Character ‘P’
44H → Character ‘D’