Original EC Declaration of Conformity
(Machinery Directive 2006/42/EC)
Manufacturer: Terex® Deutschland GmbH
Industriestrasse 3, 76669 Bad Schönborn, Germany
Terex® Deutschland GmbH hereby declares that the machine named below
General designation: Loading machine (developed from hydraulic excavator)
Model/Type: MHL360 E
Serial number: 360310/4075 >
conforms to the relevant requirements of Machinery Directive 2006/42/EC
Person authorized to compile the documentation
Name: Christian Engelhardt
Address: Industriestrasse 3, 76669 Bad Schönborn, Germany
It also declares conformity to the following EC Directives:
• Directive 2004/108/EC - Electromagnetic Compatibility
• Directive 97/68/EC, version 2010/26/EC - Measures against the emission of gaseous and
particulate pollutants from internal combustion engines to be installed in non-road mobile
machinery
• Directive 2000/14/EC - Noise emission in the environment by equipment for use outdoors
Sound power level measured on representative machines: 101.8 dB(A)
Guaranteed sound power level: 104 dB(A)
Conformity assessment procedure applied: Appendix VIII
Notified body involved: ID no. 0515
DGUV Test, Prüf- und Zertifizierungsstelle
Fachbereich Bauwesen
Landsberger Strasse 309, 80687 Munich, Germany
The following technical standards have been applied:
• EN 474-1:2013+A4:2013 - Earth-moving machinery - Safety -
Part 1: General requirements
• EN 474-5:2013+A3:2013 - Earth-moving machinery - Safety -
Part 5: Requirements for hydraulic excavators
• EN 13309:2010 - Construction machines - Electromagnetic compatibility of machines with
internal on-board electrical systems
To Next Page
Loading...
