Terex MHL360 E - Page 254

7 CARE AND MAINTENANCE
7.34 MHL360 E
Item
Functional checks
every 500 h
every 1000 h
every 3000 h
every 6000 h
Per year
2 years
54
All components for the driving and working operations (steering, travel
drive, brakes, outrigger, oscillating axle lock, loading equipment, uppercar-
riage slewing and braking, etc.)
O
O
55
Control elements (adjust as needed)
O
O
56
Heater and air conditioning
O
O
57
Electrical inspection and warning elements, as well as the lighting system
O
O
58
Safety equipment (function, condition and completeness)
O
O
59
Check the engine speed adjustment/load limit sensing control
O O
60
Hydraulic function check with pressure function test
O
O
61
Hose rupture safety valves, angular resolvers, and overload warning device
(all optional)
O O
62
Test run and test work
O
O
Item
General
every 500 h
every 1000 h
every 3000 h
every 6000 h
Per year
2 years
63 Lubricate the machine according to overview of lubricating points
h Page No 7.5
64
Complete operating instructions are available in the machine and are legi-
ble
O O
65 Initial inspection cards and return to TEREX | Fuchs
O
O