Terex MHL360 E - Page 29

SAFETY AND ACCIDENT PREVENTION 2
MHL360 E 2.7
Item
View
Description
39
B SB509 09
Risk of machine damage
Cleaning the machine with a pressure machine or welding can cause
damage to electrical components.
h Chapter 7.2.4 Welding
40
B SB509 46
Information sign for carrying capacity table (depending on order)
Lists the SWLs (safe working loads). The sign may or may not be pre-
sent depending on the country of delivery.
h Chapter 3.2 n Working range of the machine
41
Tipo di sis tem a ant ip arti colat o
Or ga nismo di va luta zi o ne de lla conf ormità
Tipo XXX
XX XX
XX XX
Type XXX
XX XXXX
Typ X XX
orga ni sm e d ’é valua tion de la co nfo rm ité
Type systèm e de dimin uti on des pa rticu les
Ko nformität sbew ertu ngs st elle
Typ P artik el min der u ngssys te m
B SB510 20
EMPA information sign (for Switzerland only)
Indicates the type of particle reduction system and the conformity as-
sessment body.
42
X 1
B SB510 21
Information sign for driver's cab maximum carrying capacity
Maximum carrying capacity of the cabin with operator and load.
43
Schild023
Emergency lowering valve in the cab
Indicates the emergency lowering valve's adjustment handle with red
paint. This enables the cab to be lowered manually if the hydraulics
fail.
h Chapter 5.1.3 Emergency lowering of cab
44
B SB509 40
Information sign for emergency lowering
Indicates effect of emergency lowering valve lever on cab movement.
h Chapter 5.1.3 Emergency lowering of cab