3 TECHNICAL DATA
3.12 MHL360 E
Undercarriage
Front axle: planetary drive axle with integrated
drum brake, rigid bearing, max. steering angle
27°
Rear Axle: planetary drive axle with integrated
drum brake, with self-aligning bearing, and
switching oscillating lock
Outrigger versions: 4-point outrigger
Tires: Solid rubber elastic 8x 12.00-24.
fully applied
Service brake: a hydraulically activated single-
circuit brake system that works on all four pairs of
wheels.
Parking brake: electrically or hydraulically acti-
vated spring-loaded disk brake on the drive
transmission acting via propshafts on the front
and rear axles.
Cabin
Hydraulic height adjustment up to a viewing
height of 6.10 m and moveable by 2.20 m inde-
pendently of this.
As an option, the cab can be supplied with rein-
forced glass or LEXAN glazing (windshield and
skylight).
Heating : Hot water heating with variable tem-
perature setting and multi-level blower, adjustable
defroster nozzles.
Air conditioning system: Automatic air condi-
tioning, reheating function
Operator's seat: Air-cushioned comfort seat with
integrated headrest, safety belt and lower lumbar
support, with heated seat and passive air condi-
tioning as an option.
Display and control elements: Display and con-
trol elements for driving and loading operations
arranged around the operator's seat.
Monitoring: Automatic monitoring, warning, and
storage of deviating operating states with warning
indication. Machine functions that are reduced or
shut down as a function of limit values that are
exceeded.
Control
With ISO control unit as standard, others availa-
ble as an option
h Chapter 5.6.3 Checking the control unit
Weights and loads
Minimum operating weight: 43.5 t
Maximum operating weight: 48.8 t
Permissible axle load, front: 42.8 t
Permissible axle load, rear: 42.8 t
Maximum surface load with 4-point outrigger:
p
max.
= 125 N/cm
2
Load assumption according to carrying capacity
table in accordance with DIN ISO 10567 – 16,5 m
loading equipment
Noise level values
Measuring method according to directive
2000/14/EC
Measured representative sound power level
L
WA
: 101.8 dB(A) as per Directive 2000/14/EC
Guaranteed sound power level
L
WA
: 104 dB(A) as per Directive 2000/14/EC
Sound pressure level at the operator’s seat
L
: 69 dB(A) as per ISO6396:2008
Vibrations
Weighted r.m.s. value of acceleration of upper
limbs is below 2.5 m/s².
Weighted r.m.s. value of acceleration for seat
area and feet is below 0.5 m/s².
To Next Page
Loading...
