Terex MHL360 E - Page 91

DISPLAY AND CONTROL ELEMENTS 4
MHL360 E 4.27
Operating note
In order to preselect/activate switchable
functions with the function keys on the side:
►
Briefly press side function key.
A symbolized LED (47/10) appears.
For some functions, the symbol of the indi-
cator also changes. Example (47/12).
The function is preselected. If there are no
other control elements the function is also
activated. If there is also a control element
to operate for the function, such as a but-
ton on the four-way control lever, the func-
tion is only activated when this button is ac-
tivated.
or multifunction button
►
Use the mini-joystick to navigate the focus
to the desired button.
►
Briefly press the button.
In order to open a menu:
►
Briefly press side function button, for the
function menu with the 4-way rocker, press
the central button.
The menu appears.
or multifunction button
►
Use the mini-joystick to navigate the focus
to the desired sensitive area.
►
Briefly press the button.
The menu appears.
Some functions can be configured. In order to
open a configuration menu:
►
Press the side function button or hold down
the button (47/13) until the menu appears.
11
95
C
100
C
F
0 ½ 1
09 :43 11 .03. 2 011
MH LX X X / XXX X
18 00 U PM
0 5 1 0 15 20 2 5
3
2
1
0
4
8
7
6
9
5
BSB50604
10
13
12
11
14
Fig. 47 Switching options
0 Function menu
1 Main menu
2 Date/time - Operating hours changeover
3 Rear view camera
4 Gear changing
5 Reversing fan switching
6 Magnet system switching - configuration menu
7 Only with FQC special equipment
8 Not Used
9 Not Used