Cisco ASR 1004 Hardware Installation Guide

CHAPTER 3
Cisco ASR 1000 Series Routers Embedded
Services Processors
The Cisco ASR 1000 Series embedded services processors are based on the Cisco QuantumFlow Processor
(QFP) for next-generation forwarding and queuing. The Cisco ASR1000-ESP5, Cisco ASR1000-ESP10,
Cisco ASR1000-ESP10-N, Cisco ASR1000-ESP20, Cisco ASR1000-ESP40, Cisco ASR1000-ESP100, and
Cisco ASR 1000-ESP200 provide centralized forwarding-engine options for the Cisco ASR 1000 Series
Aggregation Services Routers.
Additionally, the Cisco ASR 1002 Fixed Router includes a nonmodular, fixed embedded services processor
with a throughput of 2.5 Gbps and the Cisco ASR 1001 Router has a nonmodular, fixed embedded services
processor with a throughput of 2.5 Gbps, which is upgradable with a software activated performance upgrade
license to 5 Gbps.
The Cisco ASR 1000 Series embedded service processors:
•
Provide the centralized embedded forwarding services responsible for the bulk of the data plane
processing tasks. All network traffic through the Cisco ASR 1000 Series system flows through the
Cisco ASR 1000 Series Embedded Services Processors.
•
Are responsible for the data-plane processing tasks and all network traffic flows through them.
•
Support Forwarding Engine Control Processor which provide hardware abstraction layer between the
QFP-based forwarding engine and other system components, allowing datapath and management
functions to be independent.
•
Support Cisco QuantumFlow Processor (QFP) forwarding engines.
•
Support QFP provisioned with two TCAM4 devices for ACL lookup and other software features.
•
Perform all baseline packet routing operations, including MAC classification, Layer 2 and Layer 3
forwarding, quality-of-service (QoS) classification, policing and shaping, security access control lists
(ACLs), VPNs, load balancing, NetFlow.
•
Are responsible for features such as firewalls, intrusion prevention, Network Based Application
Recognition (NBAR), Network Address Translation (NAT), and flexible pattern matching.
•
Incorporates a security encryption coprocessor to assist encryption processing common to all embedded
services processors. The security processor operates in coprocessor mode and only processes packets
sent to it by the Cisco QFP.
Cisco ASR 1000 Series Router Hardware Installation Guide
87

Cisco ASR 1004 Specifications

General

Product Type	Router
Form Factor	Rack-mountable
Rack Height	2U
Forwarding Capacity	Up to 20 Gbps
Total Number of Ports	Varies by configuration
Number of Total Expansion Slots	4
Product Series	ASR 1000
Model	ASR 1004
Forwarding Performance	Up to 20 Gbps
Operating System	Cisco IOS XE
Power Supply	Dual
Route Processor	ASR 1000 Series Route Processor
Network Interface Modules	SFP, SFP+, Gigabit Ethernet, 10 Gigabit Ethernet
Interfaces/Ports	Varies by configuration
Expansion Slot Type	SPA
Throughput	20 Gbps
Redundancy	Power supply, Route Processor
Interfaces	Gigabit Ethernet, 10 Gigabit Ethernet, SFP, SFP+
Storage	Up to 64 GB Flash