Cisco ASR 1004 Hardware Installation Guide

•
9600 baud
•
8 data bits
•
No parity generation or checking
•
1 stop bit
•
No flow control
Step 6
Continue with the installation by referring to the procedure described in the Connecting External Cables to the Cisco
ASR 1002-X Router, on page 364.
Connecting External Cables to the Cisco ASR 1002-X Router
Keep the following guidelines in mind when connecting external cables to the Cisco ASR 1002-X Router:
•
To reduce the chance of interference, avoid crossing high-power lines with any interface cables.
•
Verify all the cabling limitations (particularly, distance) before powering on the system.
Cisco ASR 1000 Series Router Hardware Installation Guide
364
Cisco ASR 1002-X Router Overview and Installation
Connecting External Cables to the Cisco ASR 1002-X Router

Cisco ASR 1004 Specifications

General

Product Type	Router
Form Factor	Rack-mountable
Rack Height	2U
Forwarding Capacity	Up to 20 Gbps
Total Number of Ports	Varies by configuration
Number of Total Expansion Slots	4
Product Series	ASR 1000
Model	ASR 1004
Forwarding Performance	Up to 20 Gbps
Operating System	Cisco IOS XE
Power Supply	Dual
Route Processor	ASR 1000 Series Route Processor
Network Interface Modules	SFP, SFP+, Gigabit Ethernet, 10 Gigabit Ethernet
Interfaces/Ports	Varies by configuration
Expansion Slot Type	SPA
Throughput	20 Gbps
Redundancy	Power supply, Route Processor
Interfaces	Gigabit Ethernet, 10 Gigabit Ethernet, SFP, SFP+
Storage	Up to 64 GB Flash