Cisco ASR 1004 Hardware Installation Guide

•
Have experience as electronic or electromechanical technicians.
•
Have experience in installing high-end networking equipment. Certain procedures described in this guide
require a certified electrician.
Document Organization
The following table describes the chapters and appendixes in this installation guide:
DescriptionChapter and Appendix
The preface provides objectives, audience and organization of this manual.Preface
This chapter provides an overview of the Cisco ASR 1000 Series
Aggregation Services Routers.
Chapter 1, “Cisco ASR 1000
Series Routers Hardware
Overview”
This chapter provides an overview of the hardware components for the
Cisco ASR 1000 Series Aggregation Services Routers.
Chapter 2, “Cisco ASR 1000
Series Routers Component
Overview”
This chapter describes the Cisco ESPs for the ASR 1000 platform routers.
Chapter 3, “Cisco ASR 1000
Series Routers Embedded
Services Processors”
This chapter describes the Cisco SIPs for the ASR 1000 platform routers.
Chapter 4, “Cisco ASR 1000
Series Router SPA Interface
Processors (SIPs)”
This chapter provides site preparation guidelines for installing the ASR
1000 Series Routers.
Chapter 5, “Preparing Your Site
for Installation”
This chapter describes the Cisco ASR 1006 router and how to install it.
Chapter 6, “Cisco ASR 1006
Router Overview and
Installation”
This chapter describes the Cisco ASR 1004 router and how to install it.
Chapter 7, “Cisco ASR 1004
Router Overview and
Installation”
This chapter describes the Cisco ASR 1002 router and how to install it.
Chapter 8, “Cisco ASR 1002
Router Overview and
Installation"
This chapter describes the Cisco ASR 1002-F router and how to install it.
Chapter 9, “Cisco ASR 1002-F
Router Overview and
Installation"
Cisco ASR 1000 Series Router Hardware Installation Guide
xxiv
Preface
Document Organization

Cisco ASR 1004 Specifications

General

Brand	Cisco
Model	ASR 1004
Category	Network Router
Language	English