Cisco ASR 1004 Hardware Installation Guide

CHAPTER 6
Cisco ASR 1006 Router Overview and Installation
This chapter describes the Cisco ASR 1006 Router and the procedures for installing the Cisco ASR 1006
Router on an equipment shelf or in equipment racks. It also describes how to connect interface and power
cables.
This chapter contains the following sections:
•
Cisco ASR 1006 Router Description, page 139
•
Installation Methods, page 143
•
General Rack Installation Guidelines, page 143
•
Guidelines for an Equipment Shelf or Tabletop Installation, page 145
•
Equipment Shelf or Tabletop Installation, page 146
•
Rack-Mounting the Cisco ASR 1006 Router, page 148
•
Attaching the Chassis Rack-Mount Brackets, page 149
•
Installing the Cisco ASR 1006 Router in a Rack, page 153
•
Attaching the Cable-Management Brackets, page 158
•
Attaching a Chassis Ground Connection, page 161
•
Connecting the Shared Port Adapter Cables, page 163
•
Connecting the Console and Auxiliary Port Cables, page 163
•
Connecting Power to the Cisco ASR 1006 Router, page 165
•
Connecting a Terminal to the Cisco ASR 1000 Series RP Console Port, page 176
•
Connecting the System Cables, page 179
•
Attaching Cable Retention Bracket on AC Power Supply, page 179
Cisco ASR 1006 Router Description
The Cisco ASR 1006 Router supports full-width card modules. It is designed with a single midplane with
connectors on one interface midplane. The Cisco ASR 1006 Router supports:
Cisco ASR 1000 Series Router Hardware Installation Guide
139

Cisco ASR 1004 Specifications

General

Product Type	Router
Form Factor	Rack-mountable
Rack Height	2U
Forwarding Capacity	Up to 20 Gbps
Total Number of Ports	Varies by configuration
Number of Total Expansion Slots	4
Product Series	ASR 1000
Model	ASR 1004
Forwarding Performance	Up to 20 Gbps
Operating System	Cisco IOS XE
Power Supply	Dual
Route Processor	ASR 1000 Series Route Processor
Network Interface Modules	SFP, SFP+, Gigabit Ethernet, 10 Gigabit Ethernet
Interfaces/Ports	Varies by configuration
Expansion Slot Type	SPA
Throughput	20 Gbps
Redundancy	Power supply, Route Processor
Interfaces	Gigabit Ethernet, 10 Gigabit Ethernet, SFP, SFP+
Storage	Up to 64 GB Flash