Cisco ASR 1004 Hardware Installation Guide

The following table lists the Cisco ASR 1006 Router physical specifications.
Table 95: Cisco ASR 1006 Router Specifications
SpecificationDescription
Connects the Cisco ASR 1000 Series RP1, Cisco ASR 1000 Series
ESP, Cisco ASR 1000 Series SPA Interface (SIP), SPAs, and
power supplies together in the system
Midplane
Height = 10.5 in. (25.4 cm)
Width = 17.25 in.(43.815 cm)
Depth = 22.50 in. (57.15 cm)
Dimensions (H x W x D)
•
Fully loaded chassis: 109.1 pounds (49.5 kg)
•
Only chassis: 25 pounds (11.33kg)
Using the Cisco ASR1000-ESP100 instead of the Cisco
ASR1000-ESP40 adds 2.1 lbs to the total weight of the
router.
Note
Weight
•
41° to 104° F
•
5° to 40° C
Nominal operating temperature
10% to 85%Nominal operating humidity
• –38° to 150° F
• –40° to 70° C
Storage temperature
•
Maximum DC: 1700W
•
Maximum AC: 1600W
•
Maximum (Out): 1275W
Power consumption
Cisco ASR 1006 Router Memory and Storage Options
The following table lists the hardware memory and storage options supported on the Cisco ASR 1006 Router.
Table 96: Memory and Storage Options for Cisco ASR 1006 Router
Maximum System SupportDefaultMemory Type
4 GBDRAM2 GB DRAMRP1
Cisco ASR 1000 Series Router Hardware Installation Guide
616
Cisco ASR 1000 Series Router Specifications
Cisco ASR 1006 Router Memory and Storage Options

Cisco ASR 1004 Specifications

General

Product Type	Router
Form Factor	Rack-mountable
Rack Height	2U
Forwarding Capacity	Up to 20 Gbps
Total Number of Ports	Varies by configuration
Number of Total Expansion Slots	4
Product Series	ASR 1000
Model	ASR 1004
Forwarding Performance	Up to 20 Gbps
Operating System	Cisco IOS XE
Power Supply	Dual
Route Processor	ASR 1000 Series Route Processor
Network Interface Modules	SFP, SFP+, Gigabit Ethernet, 10 Gigabit Ethernet
Interfaces/Ports	Varies by configuration
Expansion Slot Type	SPA
Throughput	20 Gbps
Redundancy	Power supply, Route Processor
Interfaces	Gigabit Ethernet, 10 Gigabit Ethernet, SFP, SFP+
Storage	Up to 64 GB Flash