Cisco ASR 1004 Hardware Installation Guide

SpecificationDescription
Nominal 5° to 40° COperating temperature
10% to 90% non-condensingNominal operating humidity
• –38° to 150° F
• –40° to 70° C
Storage temperature
•
Maximum (DC): 500 W
•
Maximum (AC): 471 W
•
Maximum (Out): 400 W
Power consumption
Cisco ASR 1001 Router Memory and Storage Options
The following table lists the hardware memory and storage options supported on the Cisco ASR 1001 Router.
Table 126: Memory and Storage Options for Cisco ASR 1001 Router
Maximum System SupportDefaultMemory Type
1 GB DRAM maximum1 GB DRAM defaultESP
16 GB DRAM maximum
• Cisco ASR 1001 Route Processor
comes with 4 GB DRAM (default)
• Cisco ASR 1001 offers 8 GB
Embedded USB memory (EUSB)
support (partitioned: two 32-MB
for nonvolatile RAM [NVRAM]
and the rest for mass storage)
Route Processor
—
1 GB USB flash memory supportExternal USB flash memory
Cisco ASR 1000 Series Router Hardware Installation Guide
636
Cisco ASR 1000 Series Router Specifications
Cisco ASR 1001 Router Memory and Storage Options

Cisco ASR 1004 Specifications

General

Product Type	Router
Form Factor	Rack-mountable
Rack Height	2U
Forwarding Capacity	Up to 20 Gbps
Total Number of Ports	Varies by configuration
Number of Total Expansion Slots	4
Product Series	ASR 1000
Model	ASR 1004
Forwarding Performance	Up to 20 Gbps
Operating System	Cisco IOS XE
Power Supply	Dual
Route Processor	ASR 1000 Series Route Processor
Network Interface Modules	SFP, SFP+, Gigabit Ethernet, 10 Gigabit Ethernet
Interfaces/Ports	Varies by configuration
Expansion Slot Type	SPA
Throughput	20 Gbps
Redundancy	Power supply, Route Processor
Interfaces	Gigabit Ethernet, 10 Gigabit Ethernet, SFP, SFP+
Storage	Up to 64 GB Flash