Cisco ASR 1004 Hardware Installation Guide

What to Do Next
You can install your Cisco AR1006 chassis on a two-post rack or a four-post rack. See the Two-Post Rack
Installation, on page 381 and the four-post rack installation, go to the Four-Post Rack Installation, on page
383.
Two-Post Rack Installation
The Cisco ASR 1013 Router can be installed on a two-post 19-inch equipment rack. The following image
shows the Cisco ASR 1013 Router installed on a two-post rack.
Figure 183: Installing the Cisco ASR 1013 Router on a Two-Post Rack
Cisco ASR 1000 Series Router Hardware Installation Guide
381
Cisco ASR 1013 Router Overview and Installation
Two-Post Rack Installation

Cisco ASR 1004 Specifications

General

Product Type	Router
Form Factor	Rack-mountable
Rack Height	2U
Forwarding Capacity	Up to 20 Gbps
Total Number of Ports	Varies by configuration
Number of Total Expansion Slots	4
Product Series	ASR 1000
Model	ASR 1004
Forwarding Performance	Up to 20 Gbps
Operating System	Cisco IOS XE
Power Supply	Dual
Route Processor	ASR 1000 Series Route Processor
Network Interface Modules	SFP, SFP+, Gigabit Ethernet, 10 Gigabit Ethernet
Interfaces/Ports	Varies by configuration
Expansion Slot Type	SPA
Throughput	20 Gbps
Redundancy	Power supply, Route Processor
Interfaces	Gigabit Ethernet, 10 Gigabit Ethernet, SFP, SFP+
Storage	Up to 64 GB Flash