Cisco ASR 1004 Hardware Installation Guide

Connecting the Network Management and Signal System Cables
The Cisco ASR 1004 Router has connections to both the internal Ethernet management network and the
external data network.
•
T
he internal Ethernet management network connections are made through an Ethernet port on the front
panel of the Cisco ASR 1000 Series Route Processor 1.
•
The external data network connections are made through front panel ports on several types of SPAs.
Keep the following guidelines in mind when connecting external cables to the Cisco ASR 1004 Router:
•
To reduce the chance of interference, avoid crossing high-power lines with any interface cables.
•
Verify all cabling limitations (particularly distance) before powering on the system.
Cisco ASR 1000 Series Router Hardware Installation Guide
218
Cisco ASR 1004 Router Overview and Installation
Connecting the Network Management and Signal System Cables

Cisco ASR 1004 Specifications

General

Product Type	Router
Form Factor	Rack-mountable
Rack Height	2U
Forwarding Capacity	Up to 20 Gbps
Total Number of Ports	Varies by configuration
Number of Total Expansion Slots	4
Product Series	ASR 1000
Model	ASR 1004
Forwarding Performance	Up to 20 Gbps
Operating System	Cisco IOS XE
Power Supply	Dual
Route Processor	ASR 1000 Series Route Processor
Network Interface Modules	SFP, SFP+, Gigabit Ethernet, 10 Gigabit Ethernet
Interfaces/Ports	Varies by configuration
Expansion Slot Type	SPA
Throughput	20 Gbps
Redundancy	Power supply, Route Processor
Interfaces	Gigabit Ethernet, 10 Gigabit Ethernet, SFP, SFP+
Storage	Up to 64 GB Flash