Cisco ASR 1004 Hardware Installation Guide

Behavior DescriptionColorLEDLED Label
The Cisco ASR 1000
Series SPA Interface
Processor has
encountered an error
RedSystem statusSTATUS
Lit when the Cisco ASR
1000 Series SIP is loading
Yellow
The SPA drivers have
started and are running
and all critical processes
are running (as
determined by the Cisco
ASR 1000 Series SPA
Interface (SIP) Process
Manager).
Solid green
The Cisco ASR1002-SIP10 supports a built-in 4xGE SPA and three half-height SPAs (one half-height and
one full-height SPA). The Cisco ASR1002-SIP10 also functions as the base board for the Cisco embedded
ASR1000-RP1. The Cisco 1002 Router has one slot for FP0 with three subslots for SPAs, subslots 1 - 3.
SPA Interface Processor Slot Numbering
A shared port adapter is a modular type of port adapter that inserts into a subslot of a compatible SIP to provide
network connectivity and increased interface port density. The Cisco ASR 1000 Series SPA Interface Processor
(SIP) provides an aggregation function for SPAs.
Cisco ASR 1006 Router and Cisco ASR 1004 Router
In the Cisco ASR 1006 Router and Cisco ASR 1004 Router, the SIP supports:
•
Four half-height (¼ rate or full rate or combination)
•
Two full-height (¼ rate or full rate or combination) SPAs with up to 32 ports per SPA
•
Two half-height and 1 full-height combination that does not exceed 64 ports
The slot numbering for the SPAs in the Cisco ASR 1004 Router is the same as in the Cisco ASR 1006 Router.
Cisco ASR 1000 Series Router Hardware Installation Guide
104
Cisco ASR 1000 Series Router SPA Interface Processors (SIPs)
SPA Interface Processor Slot Numbering

Cisco ASR 1004 Specifications

General

Brand	Cisco
Model	ASR 1004
Category	Network Router
Language	English