Cisco ASR 1004 Hardware Installation Guide

CHAPTER 2
Cisco ASR 1000 Series Routers Component
Overview
This chapter contains the following sections:
For the Cisco Embedded Services Processor see, xref and for the SPA Interface Processor see, xrefNote
•
Cisco ASR 1000 Series Routers Component Software Support, page 25
•
Supported ASR 1000 Hardware Components, page 27
•
Cisco ASR 1000 Series Route Processor, page 36
•
Cisco ASR 1000 Series Router Power Supplies, page 48
•
Power Supplies for the Cisco ASR 1006 Router, page 51
•
Power Supplies for the Cisco ASR 1004 Router, page 59
•
Power Supplies for the Cisco ASR 1002 Router, page 66
•
Power Supplies for the Cisco ASR 1013 Router, page 76
•
Power Supplies for the Cisco ASR 1001 Router, page 83
Cisco ASR 1000 Series Routers Component Software Support
This section lists the new hardware supported on the Cisco ASR 1000 Series routers and the version of Cisco
IOS software code required to support the component. xref table lists the components that are not supported
by earlier releases of Cisco IOS XE.
Cisco ASR 1000 Series Router Hardware Installation Guide
25

Cisco ASR 1004 Specifications

General

Product Type	Router
Form Factor	Rack-mountable
Rack Height	2U
Forwarding Capacity	Up to 20 Gbps
Total Number of Ports	Varies by configuration
Number of Total Expansion Slots	4
Product Series	ASR 1000
Model	ASR 1004
Forwarding Performance	Up to 20 Gbps
Operating System	Cisco IOS XE
Power Supply	Dual
Route Processor	ASR 1000 Series Route Processor
Network Interface Modules	SFP, SFP+, Gigabit Ethernet, 10 Gigabit Ethernet
Interfaces/Ports	Varies by configuration
Expansion Slot Type	SPA
Throughput	20 Gbps
Redundancy	Power supply, Route Processor
Interfaces	Gigabit Ethernet, 10 Gigabit Ethernet, SFP, SFP+
Storage	Up to 64 GB Flash