Cisco ASR 1004 Hardware Installation Guide

CHAPTER 1
Cisco ASR 1000 Series Routers Hardware
Overview
The Cisco ASR 1000 Series Aggregation Services Routers are the next generation midrange router products.
The system is based on Cisco QuantumFlow Processor technology using a family of Cisco-developed
processors.
The Cisco ASR 1000 Series Routers target both enterprise and service provider applications but with higher
performance and improved availability. Applications covered by Cisco ASR 1000 Series Routers are:
• Enterprise applications—Intended as the mid-size aggregation and gateway router typically residing
in a regional or large branch office:
◦
WAN aggregation at Cisco Enterprise core
◦
Internet gateway
◦
Branch or regional office aggregation
◦
Remote access aggregation
• Service provider applications—Intended as the low-end service provider edge and broadband aggregation
device with similar throughput:
◦
High-end customer premises equipment (CPE) for business-quality Internet access
◦
Service provider leased line aggregation
◦
Provider edge (PE) and high-end customer edge (CE) for Layer 2 VPN or Layer 3 VPN services
◦ Broadband aggregation—PPPoE/PPPoA aggregation and Service Selection Gateway (SSG)
◦
Low-end Ethernet aggregation
This chapter provides an overview of the Cisco ASR 1000 Series Routers and contains the following sections:
•
Cisco ASR 1000 Series Routers, page 2
•
Cisco ASR 1000 Series Router Features, page 3
•
Cisco ASR 1000 Series Routers Compatibility Information, page 5
•
Cisco ASR 1000 Series Router Configurations, page 7
Cisco ASR 1000 Series Router Hardware Installation Guide
1

Cisco ASR 1004 Specifications

General

Brand	Cisco
Model	ASR 1004
Category	Network Router
Language	English