EasyManuals Logo

Cisco ASR 1004 Hardware Installation Guide

Cisco ASR 1004
702 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #660 background imageLoading...
Page #660 background image
SpecificationDescription
Height: 3.5 in. (8.9 cm)
Width: 17.25 in. (19-inch rack-mount or optional 23 Telco adaptor
brackets)
Depth: 22.50 in. (including card handles, cable-management
brackets, and power supply handles) for mounting in a
600mm-enclosed cabinet
Dimensions (H x W x D)
•
40 lbs (18.143 kg) for a fully loaded Cisco ASR 1002 Router
or Cisco ASR 1002-F Router
•
43.35 lbs (19.662 kg) for a fully loaded Cisco ASR 1002-X
Router
Weight
•
41° to 104° F
•
5° to 40° C
Nominal operating temperature
10% to 85%Nominal operating humidity
• –38° to 150° F
• –40° to 70° C
Storage temperature
•
Maximum DC: 590W
•
Maximum AC: 560W
•
Maximum (Out): 470W
Power consumption
Cisco ASR 1002 Router Mgmt Ethernet RJ-45 Port Pinouts
Unless stated otherwise, the specifications for the Cisco ASR 1002-X Router are the same as the Cisco
ASR 1002 Router specifications listed in this section.
Note
The Cisco ASR 1002 Router has RJ-45 port for the 10/100/1000 Ethernet connections. The RJ-45 port supports
IEEE 802.3ab (Gigabit Ethernet) and IEEE 802.3u (Fast Ethernet) interfaces compliant with 10BASET,
100BASETX, and 1000BASET specifications.
The RJ-45 port supports standard straight-through and crossover Category 5 UTP cables with RJ-45 connectors.
Cisco does not supply Category 5 UTP cables; these cables are available commercially.
The following table lists the RJ-45 port pinout for the front panel Management Ethernet port.
Cisco ASR 1000 Series Router Hardware Installation Guide
626
Cisco ASR 1000 Series Router Specifications
Cisco ASR 1002 Router Mgmt Ethernet RJ-45 Port Pinouts

Table of Contents

Other manuals for Cisco ASR 1004

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ASR 1004 and is the answer not in the manual?

Cisco ASR 1004 Specifications

General IconGeneral
Product TypeRouter
Form FactorRack-mountable
Rack Height2U
Forwarding CapacityUp to 20 Gbps
Total Number of PortsVaries by configuration
Number of Total Expansion Slots4
Product SeriesASR 1000
ModelASR 1004
Forwarding PerformanceUp to 20 Gbps
Operating SystemCisco IOS XE
Power SupplyDual
Route ProcessorASR 1000 Series Route Processor
Network Interface ModulesSFP, SFP+, Gigabit Ethernet, 10 Gigabit Ethernet
Interfaces/PortsVaries by configuration
Expansion Slot TypeSPA
Throughput20 Gbps
RedundancyPower supply, Route Processor
InterfacesGigabit Ethernet, 10 Gigabit Ethernet, SFP, SFP+
StorageUp to 64 GB Flash

Related product manuals